Barnett Wildcat C6 Crossbow
The Barnett Wildcat C6 shoots 320 FPS at a 125-lb draw, producing about 91 ft-lbs of kinetic energy, and takes standard 20-inch Headhunter bolts - the three 20-inch arrows in its original package confirm it, not the narrow Hyperflite shaft. It is an older, discontinued package, now found only secondhand alongside its better-known sibling, the Wildcat C5.
Specifications
| Speed | 320 FPS |
| Draw weight | 125 lbs |
| Power stroke | 13.5" |
| Kinetic energy | ~91 ft-lbs |
| Overall length | 35.75" |
| Axle-to-axle | ~18" |
| Weight | 7 lbs |
| Bolt family | Headhunter, 20" |
| Status | Discontinued |
Wildcat C6 vs. Wildcat C5
The C6 and the Wildcat C5 were Barnett's two volume Wildcats, sold around the same era and both gone from the current catalog now. The C6 ran a lighter 125-lb draw at the same 320 FPS as the C5's 150-lb draw, and its package included a 4x32 scope and a 3-arrow quiver with three 20-inch Headhunter arrows already in the box - where the C5's listings varied more by retailer. Both share the same standard-diameter bolt fit, so a buyer choosing between two used listings is really choosing on draw weight and what accessories came with it, not on the arrows.
Barnett's current entry-level Wildcat is the Wildcat CRX, which replaced both the C5 and the C6; see the model overview for where it sits in the current range.
Specs and What Shipped in the Box
The Wildcat C6 is rated at 320 FPS from a 125-lb draw with a 13.5-inch power stroke, working out to roughly 91 ft-lbs of kinetic energy with a 400-grain arrow - entry-level numbers that were still enough for deer-sized game at sensible range when it was current. It measures 35.75 inches overall, about 18 inches axle-to-axle, and weighs 7 lbs bare.
The factory package included a 4x32 multi-reticle scope, a 3-arrow quiver and three 20-inch, 400-grain Headhunter carbon arrows - no cocking device was part of the standard box, matching the C5's setup.
Popular options on Amazon
Prices change often - check the current price on Amazon.
Headhunter Bolts, Confirmed by the Arrows in the Box
There is no Hyper in the Wildcat C6's name, so it takes standard-diameter Headhunter bolts rather than the narrow Hyperflite shaft - the factory package shipped with three 20-inch Headhunter arrows, which is the most direct confirmation available. A 20-inch Headhunter 5-pack is the correct refill, and the full model-by-model list is on the fit by model page.
Buying a Used Wildcat C6
The C6 turns up only secondhand now, so treat a listing the way you would any older Barnett: check the limbs, cams and rail, which are model-specific and are not made aftermarket once stock runs out. A crank or rope cocker is worth adding if the bow did not come with one - the 125-lb draw is light enough that a rope cocker alone is manageable for most shooters.
Once the bow checks out, re-zero the scope at 20 yards before the first hunt, following the sighting-in guide.
What Still Fits a Wildcat C6 Today
Everything consumable on a Wildcat C6 is still sold new, even though the crossbow itself is not. Standard 20-inch Headhunter bolts refill the three that shipped in the box, rail and string lube wax keeps the rail from wearing the string prematurely, and a crank or rope cocker covers the cocking device the factory package did not include.
The one part that is model-specific and worth checking before buying used is the string and cable set - at 320 FPS and a 125-lb draw it is a lighter load than most current Barnetts, but a brittle decade-old factory string is still the most common reason a used Wildcat throws bolts off target.
Frequently Asked Questions
What bolts does the Barnett Wildcat C6 use?
How fast is the Barnett Wildcat C6?
Is the Barnett Wildcat C6 still sold new?
What is the difference between the Wildcat C6 and Wildcat C5?
What scope did the Barnett Wildcat C6 come with?
Ready to check the latest price?
Check Headhunter bolts on Amazon


