Barnett Game Crusher Crossbow

The Barnett Game Crusher is a discontinued 340 FPS crossbow on a 165-lb draw, built around a rope cocker instead of a crank, with a 4x32 scope and quiver included in the package. It takes standard Headhunter bolts, not Hyperflite, and the 35.75-inch replacement string already documented for this model confirms the fit.

Barnett sold the Game Crusher (model BAR78007) as a mid-weight hunting package, and it still turns up secondhand and through closeout retailers often enough that owners need the specs, the bolt fit and where it sits against the rest of the lineup. All three are below.

Specifications

Speed340 FPS
Draw weight165 lbs
Power stroke11.4"
Kinetic energy90 ft-lbs
Axle-to-axle21"
Weight7.5 lbs
Bolt familyHeadhunter (standard)
CockingRope cocker (included)
StatusDiscontinued

What Shipped in the Box

The Game Crusher package was built around a rope cocking device rather than a crank: a 4x32 multi-reticle scope, a lightweight quiver, the rope cocker itself, and string and rail wax. Barnett listed it with a single bolt in the box rather than the two or three that ship with most packages, so budgeting for a few extra Headhunter arrows before the first hunt is worth doing.

The trigger is a metal-injection-molded assembly built on Barnett's TriggerTech platform - a 3-pound pull with zero creep, the same standard used across the current range - paired with an anti-vibration foot stirrup to keep the front end quiet on the shot.

Headhunter Bolts and the 35.75-Inch String

There is no Hyper in the Game Crusher's name, so the rule that runs across the whole Barnett range applies here too: it takes standard-diameter Headhunter bolts, not the narrow Hyperflite shaft built for the Hyper series. The bolt family is confirmed independently by the string - aftermarket makers cut the Game Crusher's replacement bowstring at 35.75 inches, a length distinct from most of the rest of the lineup and already documented on the fit by model page.

That matters for anyone buying a used Game Crusher with no manual: measure the string on the bow or order to the 35.75-inch figure rather than guessing from a similar-looking model, since a string cut to the wrong length either will not seat or sits loose enough to throw the draw cycle off.

Popular options on Amazon

Prices change often - check the current price on Amazon.

Where the Game Crusher Sits in the Lineup

At 165 lbs of draw weight and 340 FPS, the Game Crusher sits in the middle of Barnett's range rather than at either end. It draws heavier than the entry-level Recruit XP (125 lbs, 330 FPS) but lighter than the Predator (175 lbs, 375 FPS), which puts it closer to a general hunting bow than either a youth-friendly package or a top-speed flagship.

The rope cocker rather than a crank is the other defining choice: it halves the felt draw effort without the cost or bulk of a crank, which is the same trade Barnett still makes on several of its lighter-draw current models. Anyone upgrading from a Game Crusher who wants to go heavier on draw weight should check the crank cocking device page before assuming the included rope cocker carries over.

Is It Still Sold, and What You Can Still Buy

No - the Game Crusher is not part of Barnett's current catalogue, and there is no current listing for the crossbow itself. It still turns up secondhand and through closeout retailers often enough that parts availability matters: the 35.75-inch string and cable set is sold by more than one aftermarket maker, standard Headhunter bolts fit it the same as every other non-Hyper Barnett, and rail and string wax are the same kit used across the range.

What is harder to source, as with any discontinued Barnett, is structural - limbs, cams, the trigger assembly. Check those are sound before buying a used one; everything else on this bow is routine maintenance.

Frequently Asked Questions

What is the draw weight and speed of the Barnett Game Crusher?

165 pounds of draw weight and 340 feet per second, with roughly an 11.4-inch power stroke and about 90 ft-lbs of kinetic energy. That puts it between the entry-level Recruit XP and the faster 375 FPS-plus models in the lineup.

Does the Game Crusher use Headhunter or Hyperflite bolts?

Headhunter. There is no Hyper in the name, so the narrow Hyperflite shaft does not apply, and the model's 35.75-inch replacement string confirms the standard-diameter fit.

What is included with the Barnett Game Crusher package?

A 4x32 multi-reticle scope, a rope cocking device, a lightweight quiver, and string and rail wax. The trigger is a TriggerTech-built metal-injection-molded assembly with a 3-pound pull and zero creep.

Can I still buy a Barnett Game Crusher new?

No, it is discontinued. The 35.75-inch string and cable set and standard Headhunter bolts are both still sold, so a Game Crusher with sound limbs and rail still has hunting left in it.

Ready to check the latest price?

Check Headhunter bolts on Amazon