Barnett Crossbow Quiver

A replacement quiver fits a Barnett crossbow by its bracket, not by the model name: the bracket must match your bow's rail - a bottom Picatinny rail on older bows, a side rail on 2019-and-newer ones. Most Barnett packages already ship with a side-mount 3-to-5-arrow quiver, so match the bracket to your rail and almost any Picatinny quiver mounts.

Match the Bracket to Your Rail

The quiver is not the part that decides fit - the bracket is. Barnett has used two rail systems, and a bracket for one will not mount on the other:

  • Bottom Picatinny rail - older bows mount the quiver under the forearm on the bottom accessory rail. These take a bottom-rail bracket and single-screw into place.
  • Side Picatinny rail - 2019-and-newer bows mount the quiver on a side rail using a side-mount bracket, which comes as a metal version, a composite version, or an offset composite that adds clearance below the riser.

A bottom-rail bracket will not fit a side-rail bow, and a side-rail quiver will not fit a bottom-rail bow. Check which rail your bow has before buying anything, the same way you check the rail before adding any other replacement part.

Arrow Capacity and How It Mounts

Barnett quivers are side-mount designs that hold three to five arrows parallel to the bow, held by a foam or rubber gripper at the nock end and a hood over the broadheads. Four arrows is the common size, which covers a loaded bolt plus spares in the field.

Keep broadheads capped under the hood - an uncapped broadhead in a side quiver is level with your forearm. Loaded with 20-inch Headhunter bolts the quiver adds noticeable weight out to one side, which is normal and part of why the offset bracket exists on the newer bows.

Popular options on Amazon

Prices change often - check the current price on Amazon.

What Ships on the Bow vs. a Replacement

Nearly every Barnett package - from the entry-level bows to the full-power ones - ships with a side-mount quiver and the bracket already fitted, so most owners only shop for one when the hood cracks, the gripper tears, or the bracket is lost in a move. When that happens, the replacement question is the bracket, not the brand of quiver: once the bracket matches the rail, aftermarket Picatinny quivers mount just as well as the factory one.

If you are buying spare bolts at the same time, size the quiver to how many you actually carry rather than the biggest one available - a five-arrow quiver full of broadheads is a lot of weight hanging off one rail.

Quiver, Sling and Case Together

The quiver, the sling and the case do three different jobs. The quiver carries the arrows on the bow; the sling carries the bow hands-free to the stand; the case protects the bow in transit. Measure before assuming they all coexist: a bow with the quiver fitted is wider and taller than a bare one, and a case that closes over the bare bow may not close over the quiver and scope together.

Most hunters leave the quiver on in the field and pull it for long storage, so the case only has to swallow the quiver on travel days - which is exactly when its extra width matters most.

Mount It Before You Sight In

A loaded side quiver shifts the bow's balance to one side, and that shift is present every time you shoot with it fitted. Mount the quiver the way you will hunt with it before you zero, not after, so the scope is sighted against the same balance you will hold in the field. If you sight in with a bare bow and then hang a full quiver off the rail, expect to confirm the zero again - the sighting-in guide covers how.

Frequently Asked Questions

What quiver fits a Barnett crossbow?

Any Picatinny crossbow quiver fits once the bracket matches your bow's rail. Older bows use a bottom Picatinny rail and a bottom-rail bracket; 2019-and-newer bows use a side rail and a side-mount bracket. The bracket is what decides fit, not the model name.

Do newer Barnett crossbows use a different quiver bracket?

Yes. Bows from about 2019 on mount the quiver on a side Picatinny rail with a side-mount metal or composite bracket, often an offset composite for clearance below the riser. These are not interchangeable with the bottom-rail brackets on older bows.

How many arrows does a Barnett quiver hold?

Three to five, held parallel to the bow in a side-mount design. Four is the common size, which covers a loaded bolt plus spares. Keep the broadheads capped under the hood on a side quiver.

Can I leave the quiver on the bow in its case?

Only if the case is wide and tall enough with the quiver fitted. Measure the bow with the quiver and scope on before buying a case - width is where fit fails most often.

Ready to check the latest price?

Check a 4-arrow crossbow quiver on Amazon