Barnett Penetrator Crossbow
The Barnett Penetrator shoots 350 FPS at a 175-lb draw and takes standard 20-inch Headhunter bolts, not the narrow Hyperflite shaft - there is no Hyper in the name. It is a discontinued recurve-platform package that shipped with a scope, three 20-inch arrows and a quiver. The specs and what still fits it are below.
Specifications
| Speed | 350 FPS |
| Draw weight | 175 lbs |
| Power stroke | 12" |
| Kinetic energy | 116 ft-lbs |
| Overall length | 37" |
| Width, uncocked | 24" |
| Weight | 8.6 lbs |
| Arrow length | 20" |
| Bolt family | Headhunter |
What the Penetrator Was
The Penetrator was a recurve-platform hunting package Barnett ran in the early 2010s, built around a High-Energy cam and the CROSSWIRE string and cable system, with a thumbhole stock, a shoot-through foot stirrup and a Realtree APG camo finish. It was sold complete with a scope - a red-dot on some packages, a 4x32 on others - plus three arrows and a quiver, aimed at a hunter who wanted one box with everything in it rather than a bare bow.
It is no longer in Barnett's catalogue, so there is no new listing to buy. Where it fits in the wider range is covered on the Barnett crossbow lineup page; what matters for keeping a used one shooting is the bolt fit and the string, both below.
Headhunter Bolts, Confirmed by the Name and the Arrows
There is no Hyper in the Penetrator's name, so it follows the site's naming rule and takes standard-diameter Headhunter bolts, not the narrow Hyperflite shaft that only the Hyper-series bows use. The factory package confirmed it independently: it shipped with three 20-inch, roughly 400-grain carbon arrows, the same length and class as a Headhunter 5-pack.
Owners who ran the aluminium arrows early on found they bent quickly, while 20-inch carbon arrows held up over a season - a common pattern on bows of this era. Because Headhunter is Barnett's most common bolt, resupplying one is never the problem it can be on a Hyper bow; the Penetrator sits with the other standard-diameter bows on the fit by model page.
Popular options on Amazon
Prices change often - check the current price on Amazon.
Draw Weight, the String and Cocking It
At a 175-lb draw the Penetrator is a full-power recurve, and the factory packages were built around a rope cocker rather than a fitted crank, so it does not come with a crank cocking device installed. A rope cocker halves the felt effort and keeps the draw even on both rails; a crank is the option if a shoulder makes 175 lbs a problem to pull by rope.
The one weak point owners reported was the factory string - some failed early, and string failures are not covered by Barnett's warranty. A replacement bowstring cut for the Penetrator, waxed and kept out of damp storage, is the fix; it is also the first thing to check before shooting a secondhand one.
Buying a Used Penetrator
The crossbow itself turns up only secondhand now. What is still easy to buy new: Headhunter bolts in 5- and 12-packs, rail and string lube wax, a rope cocker or crank, and a replacement string. Before a used Penetrator leaves the garage for the first hunt, check the limbs, cams and rail - those structural parts are not made aftermarket once stock runs out - and plan on a fresh string unless you know the current one's age.
Once the bow checks out, re-zero the scope at 20 yards before trusting it, following the sighting-in guide, and add a cocking device if the bow arrived without one.
Frequently Asked Questions
What bolts does the Barnett Penetrator use?
How fast is the Barnett Penetrator?
Does the Penetrator come with a crank cocking device?
Can I still buy a Barnett Penetrator new?
Ready to check the latest price?
Check Headhunter bolts on Amazon


