Barnett Raptor FX2 Crossbow
The Barnett Raptor FX2 is a 330-FPS entry crossbow on a 150-lb draw, light at 6.5 lbs, and it takes standard 20-inch Headhunter bolts - it ships with three of them. There is no Hyper in the name, so the narrow Hyperflite shaft does not apply.
Barnett discontinued the Raptor FX2, but it is common secondhand and sits a step above the base Raptor FX. The specs, the bolt fit and what still fits it are below.
Specifications
| Speed | 330 FPS |
| Draw weight | 150 lbs |
| Kinetic energy | 97 ft-lbs |
| Power stroke | 12.5" |
| Width, cocked | 18" |
| Overall length | 34.25" |
| Weight | 6.5 lbs |
| Bolt family | Headhunter, 20" |
Raptor FX vs. Raptor FX2 vs. Hyper Raptor
Three bows carry the Raptor name and they are not the same. The Raptor FX is the base entry model; the Raptor FX2 is the updated version of it, with the same standard-diameter bolt fit and a similar 150-lb entry draw; and the Hyper Raptor is the fast flagship that switches to the narrow Hyperflite shaft. The overlap in names is exactly what trips people up when they buy bolts or a string for a used bow.
The bolt fit is the line that matters. Both the Raptor FX and the Raptor FX2 take standard-diameter Headhunter bolts, so ammunition and nocks carry over between them. The Hyper Raptor does not - it takes Hyperflite, and the word "Hyper" in its name is the only reliable tell. If a listing just says "Raptor," read the draw weight and the speed before you assume which one you are looking at.
Specs and What's in the Box
The Raptor FX2 is an entry-class package. It shoots 330 FPS on a 150-lb draw with a 12.5-inch power stroke, which works out to about 97 ft-lbs of kinetic energy - plenty for whitetail at sensible ranges and the reason it is a common first crossbow. It carries 6.5 lbs bare, 18 inches wide cocked and 34.25 inches overall, on a lightweight composite stock with a pass-through foregrip and an adjustable butt pad.
The package ships with three 20-inch Headhunter carbon arrows, a 4x32 multi-reticle scope (some deluxe runs shipped a red-dot instead), a side-mount quiver, and rail and string lube wax. The three included arrows are the most direct confirmation of the bolt family there is - standard-diameter Headhunter, not the narrow Hyperflite shaft.
Popular options on Amazon
Prices change often - check the current price on Amazon.
Cocking the Raptor FX2
At 150 lbs the Raptor FX2 is one of the lighter draws in the Barnett range, so most adults can cock it by hand, and the deluxe packages often included a rope cocking device to make it even easier and more consistent. A rope cocker also helps center the string the same way every time, which is the cheapest accuracy upgrade on an entry bow.
If shoulder or back issues make even a 150-lb hand-cock uncomfortable, a crank cocking device is an option, but confirm the stock has the mounting provision before buying one - not every entry Barnett is cut for a bolt-on crank. For most owners the included rope cocker is enough on a bow this size.
Buying a Used Raptor FX2
Because the Raptor FX2 is discontinued, it turns up secondhand far more often than new. Treat it like any older Barnett: inspect the limbs, cams and rail first, since those structural parts are not made aftermarket once stock runs out, while bolts, strings and lube wax are the easy parts to replace. A bow that has sat a season or has a replaced string should be re-checked before it is trusted downrange.
For refills, 20-inch Headhunter bolts are the correct match, and there is nothing exotic about keeping one fed. Re-zero the scope at 20 yards with the sighting-in guide before the first hunt, and if you are weighing it against the rest of the range, the model comparison places the entry Raptors against the faster options.
Frequently Asked Questions
What bolts does the Barnett Raptor FX2 use?
How fast and how powerful is the Raptor FX2?
What is the difference between the Raptor FX and the Raptor FX2?
Is the Barnett Raptor FX2 still made?
Ready to check the latest price?
Check Headhunter bolts on Amazon


