Barnett Stalker 405 Crossbow

The Barnett Stalker 405 shoots 405 FPS at a 200-lb draw, ships with a crank cocking device already fitted, and takes standard 20-inch Headhunter bolts, not the narrow Hyperflite shaft used elsewhere in the range.

The number in the name is the speed, the same pattern as the rest of the Stalker line, but the 405 actually carries the heaviest draw weight of the family at 200 lbs. Specs, the pre-installed crank and the bolt fit are below.

Specifications

Speed405 FPS
Draw weight200 lbs
Power stroke13.8"
Kinetic energy135 ft-lbs
Axle-to-axle, cocked13"
Overall length32"
Trigger pull3 lbs (TriggerTech)
Cocking deviceCrank, pre-installed
Bolt familyHeadhunter, 20"

Stalker 405: The Highest-Draw Stalker

Barnett has used the Stalker name across several draw weights and speeds - the Stalker 380 at 185 lbs, the Stalker 390 at 175 lbs and the Stalker 410 at 190 lbs - and the 405 does not slot neatly between them by draw weight even though its speed does. At 200 lbs it pulls harder than any of the other three, which is why Barnett ships it with a crank cocking device already fitted rather than leaving cocking to a rope.

If a secondhand listing just says "Stalker," the speed number and whether a crank is already mounted are the two details worth confirming before assuming which package you are getting.

Specs and What's in the Box

The Stalker 405 is rated at 405 FPS with a 380-grain arrow, for about 135 ft-lbs of kinetic energy from a 13.8-inch power stroke. It measures 13 inches axle-to-axle cocked and 32 inches overall. The trigger is a Metal Injection Molded system with an Anti-Dry-Fire safety and a TriggerTech 3-lb zero-creep release, the same trigger platform used across Barnett's current range.

The standard package centers on the crank rather than a scope-and-quiver-only build: it ships with the crank cocking device pre-installed, two carbon Headhunter arrows, a 4x32 multi-reticle scope and a side-mount quiver. The riser carries three Picatinny rails and a machined, full-length flight track, with a pass-through foregrip ahead of the trigger guard and a Mossy Oak Terra finish on the stock.

Popular options on Amazon

Prices change often - check the current price on Amazon.

Headhunter Bolts, Confirmed by the Family

There is no Hyper in the Stalker 405's name, so it follows the same rule as the rest of the Stalker line: standard-diameter Headhunter bolts in 20 inches, not the narrow Hyperflite shaft. Every other Stalker variant on this site ships the same 20-inch Headhunter length, and the full per-model fit table is on the fit by model page.

Because Headhunter is Barnett's most common bolt, keeping this bow fed with 5- or 12-packs is never a supply problem the way it can be on a Hyper-series bow.

Buying a Stalker 405

The Stalker 405 is sold through several archery and outdoor retailers; at the time of writing it does not have a confirmed live Amazon listing, unlike some of Barnett's other current packages. What is reliably available either way: 20-inch Headhunter bolts, replacement crank parts, and crossbow lube wax.

Whichever retailer it comes from, re-zero the scope at 20 yards before trusting it in the field - the sighting-in guide covers the order that avoids wasted bolts - and decock it properly with the crank between hunts rather than leaving it loaded.

Stalker 405 vs. the Rest of the Stalker Family

Lined up by the numbers: the Stalker 390 runs 390 FPS at 175 lbs with a rope cocker, the Stalker 380 runs 380 FPS at 185 lbs with no crank included, the Stalker 410 runs 410 FPS at 190 lbs, and the Stalker 405 sits just under the 410 on speed but above all three on draw weight at 200 lbs. All four take the same standard Headhunter bolts, so the choice between them is speed, draw weight and whether a crank ships in the box - not ammunition.

Frequently Asked Questions

What is the draw weight and speed of the Barnett Stalker 405?

405 FPS from a 200-lb draw, with a 13.8-inch power stroke and about 135 ft-lbs of kinetic energy.

Does the Stalker 405 come with a crank cocking device?

Yes. The crank cocking device ships pre-installed, along with a 4x32 scope, a quiver and two Headhunter arrows.

What bolts does the Barnett Stalker 405 use?

Standard Headhunter bolts, 20 inches. There is no Hyper in the name, so the narrow Hyperflite shaft does not apply.

How is the Stalker 405 different from the Stalker 410?

The Stalker 410 is slightly faster at 410 FPS against the 405's 405 FPS, but the Stalker 405 pulls a heavier 200-lb draw against the 410's 190 lbs. Both ship with a crank cocking device already fitted and take the same Headhunter bolts.

Ready to check the latest price?

Check Headhunter bolts on Amazon