Barnett Stalker 410 Crossbow

The Barnett Stalker 410 shoots 410 FPS at a 190-lb draw and is the only Stalker that ships with a crank cocking device already installed. It takes standard 20-inch Headhunter bolts, not the narrow Hyperflite shaft, and weighs 6.3 lbs with a 4x32 illuminated scope.

The number in the name is the speed, which is where it gets mixed up with the slower Stalker 380 and Stalker 390. The specs, the bolt fit and the pre-installed crank are below.

Specifications

Speed410 FPS
Draw weight190 lbs
Power stroke13.6"
Kinetic energy138 ft-lbs
Axle-to-axle, cocked13"
Overall length35.5-38"
Weight6.3 lbs
Trigger pull3 lbs (TriggerTech)
Cocking deviceCrank, pre-installed
Bolt familyHeadhunter

Stalker 410 vs. Stalker 380 and Stalker 390

Barnett sells the Stalker name across three speeds, and the number is the fps. The Stalker 410 is the fastest at 410 FPS on a 190-lb draw; the Stalker 390 runs 390 fps at 175 lb; and the Stalker 380 is the 380-fps package at 185 lb. All three are different bows that share a family name, which is the overlap that trips people up on bolts, strings and cocking gear bought secondhand.

The cleanest way to tell them apart is the cocking setup. The Stalker 410 arrives with a crank cocking device already fitted - that is the "pre installed" part buyers ask about - while the Stalker 390 includes only a rope cocker and the Stalker 380 ships with no cocking aid at all. If a used listing just says "Stalker," read the fps and the draw weight before you assume which one it is: the bolt family is the same across all three, but the crank and the price are not.

Specs and What's in the Box

Barnett lists the Stalker 410 as a current package built around the pre-fitted crank rather than a bare bow. The box holds the crank cocking device already installed, a 4x32 illuminated multi-reticle scope, a side-mount quiver, two 20-inch Headhunter carbon arrows, and rail and string lube wax. The trigger is Barnett's TriggerTech unit with a 3-pound release and an Anti-Dry-Fire safety, the same platform used across the current range.

On the numbers it is a full-power hunting bow: 410 FPS, a 190-lb draw and a 13.6-inch power stroke work out to about 138 ft-lbs of kinetic energy, comfortably inside the range for whitetail, hog and larger game. It stays compact at 13 inches axle-to-axle cocked and 35.5 to 38 inches overall, and at 6.3 lbs bare it carries a little heavier than the lighter 390 because of the fitted crank. A quick-adjust butt stock sets the length of pull for different shooters.

Popular options on Amazon

Prices change often - check the current price on Amazon.

Headhunter Bolts, Confirmed by the Arrows in the Box

There is no Hyper in the Stalker 410's name, so it follows the site's one hard rule: it takes standard-diameter Headhunter bolts, not the narrow Hyperflite shaft reserved for the Hyper series. You do not have to take the name on faith - the factory package ships with two 20-inch Headhunter carbon arrows, which is the most direct confirmation of the bolt family there is. A narrow Hyperflite shaft dropped into a bow built for standard diameter sits loose on the rail, and a loose bolt is a dry-fire waiting to happen.

For refills, a 20-inch Headhunter 5-pack is the right match out of the box, and because Headhunter is Barnett's most common shaft it is never the supply problem a Hyper-series bolt can be. If you are cross-checking against the rest of the range, the fit by model guide lists the string length and bolt family for every model.

The Pre-Installed Crank and Buying One Secondhand

The headline feature is the crank. Because the Stalker 410 leaves the factory with a crank cocking device already mounted, it drops the effective cocking effort to a fraction of the 190-lb draw and makes the full-power draw manageable for most adults without a separate purchase. That also makes it the easy pick in the Stalker line for anyone who wants top speed without wrestling a 190-lb string by hand. If a crank ever strips or the handle cracks, Barnett sells the unit on its own, so a worn crank is a part swap rather than a reason to retire the bow.

Buying used, treat it like any older Barnett: inspect the limbs, cams and rail, which are not made aftermarket once factory stock runs out, and confirm the crank is the fitted original rather than missing. Re-zero the 4x32 scope at 20 yards before the first hunt using the sighting-in guide, and keep the rail waxed so the string lasts.

Frequently Asked Questions

What bolts does the Barnett Stalker 410 use?

Standard 20-inch Headhunter bolts - the factory package ships with two of them. There is no Hyper in the name, so the narrow-diameter Hyperflite shaft does not apply.

Does the Barnett Stalker 410 come with a crank already installed?

Yes. The Stalker 410 ships with a crank cocking device pre-installed, which is what sets it apart from the Stalker 390 (rope cocker only) and the Stalker 380 (no cocking aid). The fitted crank makes the 190-lb draw manageable without a separate buy.

Is the Stalker 410 the same as the Stalker 380 or 390?

No. The number is the speed: the Stalker 410 runs 410 FPS at a 190-lb draw with a fitted crank, the Stalker 390 runs 390 fps at 175 lb with a rope cocker, and the Stalker 380 runs 380 fps at 185 lb with no cocking device. All three take Headhunter bolts.

How fast and how powerful is the Barnett Stalker 410?

410 FPS with the arrows it ships with, driven by a 190-lb draw and a 13.6-inch power stroke for about 138 ft-lbs of kinetic energy - enough for whitetail, hog and larger game at ethical ranges.

Ready to check the latest price?

Check Headhunter bolts on Amazon